4x4 problem

Reply Subscribe

Thread Tools

Search this Thread

Dec 21, 2008 | 10:07 AM

awk1964

Thread Starter

New User

Joined: Dec 2008

Posts: 4

Likes: 0

4x4 problem

I am having a problem with my 4wd not working. I am not getting any lights, noise, nothing. I checked the fuses and they are good. I have power to the solenoids in the relay box on the driver’s side and to the disconnect solenoid on the right side. When you turn the Key on, the 4x4 hi and 4x4 lo lights come on and then go out, with the rest of the indicator lights. I have vac. at the front hubs, but when you turn the 4wd switch to 4x4 hi or 4x4 lo the vac. is still there. I used the 4wd about a week ago at it worked fine. Then yesterday, nothing. Does anyone have any ideas? <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com

ffice

ffice" /><o

></o

Dec 21, 2008 | 10:15 AM

Tom

Super Moderator

Joined: Aug 2003

Posts: 25,479

Likes: 742

From: Isanti, MN

Here's a quote from another forum, by another member here with some good advice:

Quote:

Originally Posted by tylus

take a hammer and lightly hit the electric motor on the back of your t-case

then try 4x4 again.

if it works, only a temp fix. you'll need a new shifter motor eventually

Good luck!

Dec 21, 2008 | 10:24 AM

awk1964

Thread Starter

New User

Joined: Dec 2008

Posts: 4

Likes: 0

I will go try that now!!!!

Dec 21, 2008 | 10:32 AM

awk1964

Thread Starter

New User

Joined: Dec 2008

Posts: 4

Likes: 0

That did the trick. Thanks for the help. All it needed was a BFH treatment!!!

Dec 21, 2008 | 10:38 AM

WhëëlMå1

Super Moderator

Joined: Oct 2002

Posts: 8,547

Likes: 6

From: MA

Welcome to FTE. This has been a problem with the auto setup on Fords for as long as I can remember. I am SO glad I got manual lock outs and a stick when I moved from my F150 to 350.