D60 track bar mount
Thread Starter
|
Senior User
Joined: Dec 2005
Posts: 364
Likes: 0
From: Southern Delaware
D60 track bar mount
I just scored a 87 D60 front 4:10 DRW for $250 and Im planning on swapping out the D50 on my 90 F250. But the D50/F250 doesnt have a track bar mount on the frame, so when I do this swap, will there be holes on the frame/crossmember for the track bar bracket or do I need to drill new ones? I have been researching this swap and I want to make this as easy as possible when the time comes to swap it out.
Also, I want to verify (from yall who have done this swap), that the tie rods, brakes, hoses, and driveshaft will swap from the D50 to the D60.
Thanks in advance!!!
Also, I want to verify (from yall who have done this swap), that the tie rods, brakes, hoses, and driveshaft will swap from the D50 to the D60.
Thanks in advance!!!
