Forward Lean
Thread Starter
|
Senior User
Joined: Sep 2002
Posts: 325
Likes: 0
From: mt. shasta california
Forward Lean
I want to get that nice forward lean look on my 77 f-250. I was going to lift it but it is 2 wheel drive. So i figured that i would drop the front a little and raise the back a little. I dig that aggressive look. Does anyone know how i can accomplish this?
Post Fiend
Joined: Apr 2002
Posts: 5,438
Likes: 11
From: IN FRONT OF YOU
Forward Lean
>Hmm, is that all i can do? That doesn't seem like it would
>even be noticeable.
How high do you want the rear?? 2"inches is noticeable, 4" would look bad IMO.
Does your truck sit level now? or is it higher in the rear?
>even be noticeable.
How high do you want the rear?? 2"inches is noticeable, 4" would look bad IMO.
Does your truck sit level now? or is it higher in the rear?
Junior User
Joined: Aug 2002
Posts: 73
Likes: 0
Forward Lean
How about flipping the rear shackles? I know it is possible on my 1994, but am not sure about your truck. Others on this site have posted flipping the shackles have given around 3 inches of lift. Also, I replaced my shocks with Gabriel load carriers. That in itself raised my rear end about 1.5 inches. Try searching the forum for people who have done this lift. There are some pretty creative people on this site!
Good Luck,
Ben
Good Luck,
Ben
Post Fiend
Joined: Apr 2002
Posts: 5,438
Likes: 11
From: IN FRONT OF YOU
Forward Lean
>It is level.Is there anyway to drop the front 1 or 2 inches?
I can't remember, does your truck have coils up front?
You could cut a loop out of your front spring, but I woulnd't do it.
Or possibly finding a shorter coil, that would fit.
The correct way would be with a drop spindle but I am not sure if they make it for your app. Plus it would be pricey compared to lifting the rear with a block.
I can't remember, does your truck have coils up front?
You could cut a loop out of your front spring, but I woulnd't do it.
Or possibly finding a shorter coil, that would fit.
The correct way would be with a drop spindle but I am not sure if they make it for your app. Plus it would be pricey compared to lifting the rear with a block.
Trending Topics
Freshman User
Joined: Jun 2002
Posts: 26
Likes: 0
Forward Lean
2" blocks would be best. If you raise the rear and lower the fronts by cutting the coils you can run into a handling problem. Your caster will be way off due to the rake effect your looking for. Go with some huge *** tires in the rear like 35x12.50r16.5 BGFs and some 245/75r16s up front. Those changes in tire sizes can also help the appearnace you might be looking for.
Jon
Jon
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
