C6 trans reverce problem.
Thread Starter
|
New User
Joined: Dec 2007
Posts: 6
Likes: 0
C6 trans reverce problem.
I changed out the internals from a high back c6 case to a small block case and rebuild. The trans will slip bad in reverce and high, but with the valve body removed the air pressure check to the trans is good,,Could there be a problem in the valve body?
MSEE
Joined: Apr 2004
Posts: 10,386
Likes: 35
From: Austin, TX
What's up man; just thought I'd pass along that there is a dedicated transmission forum on FTE. There are definitely some helpful people in this section, but I know some of the guys in the transmission forum have helped me out with questions about my C6s. You might be able to get some more detailed info there. Here is the link:
https://www.ford-trucks.com/forums/forum69/
https://www.ford-trucks.com/forums/forum69/
