Pull to start
Thread Starter
|
New User
Joined: Oct 2008
Posts: 2
Likes: 0
Pull to start
I have a 94 F350 4X4 with a 460 and 5 speed. It will not start unless you pull start it or shoot starting fluid into the intake. The starter works fine and it cranks over normally. It will crank until the battery goes dead and never fire, but pull it 100 feet and it starts up. I have replaced the fuel pump in the tank,cap,rotor,ignition switch box under the column and nothing helps. Any ideas? Thanks.
Lead Driver
Joined: Aug 2006
Posts: 5,670
Likes: 13
From: Sand Lake, MI
Several vacuum leaks, or one large one? Just to much of a loss to over come with the starter motor, pulling it creates enough vacuum to start?
Starter draws to many amps? nothing left to fire the plugs?
Starter draws to many amps? nothing left to fire the plugs?
