Cruise Amplifier/Module

Reply Subscribe

Thread Tools

Search this Thread

Oct 14, 2008 | 03:17 PM

afront

Thread Starter

New User

Joined: Oct 2005

Posts: 16

Likes: 0

Cruise Amplifier/Module

I have a 94, 5 spd, V6, 2wd, Ranger XLT (great truck by the way) and cannot find the Amplifier for the cruise. I know its supposed to be behind or near the the radio/ash tray. I found 2 controllers on the side on the ash tray with ID numbers E6EB-14A624-AA and F37F-2C018-AA on them, but they just don't look right.

Any help will be appreciated. Thanks!!!

Oct 15, 2008 | 08:14 AM

BSmitty

Elder User

Joined: Jan 2004

Posts: 537

Likes: 0

From: Yes

In my '92, it was above the glovebox. On newer trucks, I'm not certain if it was still there or not. To check, open the glovebox up, and release it so it swings down out of the way. Then look above it under the dash. It took me a long time to find mine, I was expecting it to be on the driver's side like Gen-1 RBV's were. Hopefully that's where yours is also.