Cab replacement question
Thread Starter
|
Junior User
Joined: Sep 2007
Posts: 82
Likes: 0
From: PA
Cab replacement question
Ike took the top out of a tree and dropped it on my cab. I believe its probably repairable but my cab corners need replaced, there's a small hole in the floorboard below the gas pedal and I found some holes rusted through below the windshield when I removed the cowl to clean out all the leaves and debris. I've never seen rust there on a vehicle before.
I'm considering just replacing the whole cab. What is the difference between a cab clip and a cab? I am assuming that the clip doesn't include the interior or perhaps even the doors. I'd at least like to sound semi-intelligent when I talk to the guys at the bone yards.
I'm considering just replacing the whole cab. What is the difference between a cab clip and a cab? I am assuming that the clip doesn't include the interior or perhaps even the doors. I'd at least like to sound semi-intelligent when I talk to the guys at the bone yards.
Thread Starter
|
Junior User
Joined: Sep 2007
Posts: 82
Likes: 0
From: PA
I hadn't either until I went to search for a cab on the web. Two different nationwide auto parts search engines used the terms. I tried both and did get different results (but not so different prices).
Postmaster
Joined: Feb 2008
Posts: 2,658
Likes: 5
From: Out of here
A cab is a cab.
A "Clip" is generally both fenders, hood, radiator support all in one unit.
On some vehicles (not ours) you can take the whole front end off in one piece by removing just a few bolts.
A "Clip" is generally both fenders, hood, radiator support all in one unit.
On some vehicles (not ours) you can take the whole front end off in one piece by removing just a few bolts.
Cargo Master
Joined: Jan 2004
Posts: 2,512
Likes: 8
From: Cook Forest and Irwin PA
staying close to year correct will be easier, even tho the sheet metal is technically the same - the wiring harness pass thrus changed in 87 and again around 93? depending on which way you are going, you might end up with too much hole, or not enuf
Thread Starter
|
Junior User
Joined: Sep 2007
Posts: 82
Likes: 0
From: PA
Well, I called about a cab and asked them what the difference between a cab and a cab clip was. They're different terms for the same thing. When I asked him why they used two different terms he stated that he didn't know. Some guys there call them cab clips some just call them a cab. I think I feel better, but not really any smarter.
Trending Topics
Former Vendor
Joined: Jan 2006
Posts: 3,849
Likes: 1
From: Seattle
Before you swap cabs, check with your state vehicle licensing agency to find out about ANY REQUIREMENTS relating to the vin on your truck and the replacement cab. There is probably paperwork and documents that will need to be filled out and filed before and after you do the cab swap. This could save you a lot of trouble and money later on if you get stopped by the police for some reason. Dan.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
