pneumatic/compressor guys
Thread Starter
|
Fleet Owner
Joined: Mar 2003
Posts: 24,724
Likes: 74
From: Blue Hill Township
pneumatic/compressor guys
I have a gas powered air compressor that I am trying to get working/assembling. It doesn't have any sort of unloader for the compressor head so I was looking at this guy: WholeSale Industrial Supply Unloader Load Genie and this guy to control the motor WholeSale Industrial Supply Throttle Control
Is this going to work?
Is this going to work?
Thread Starter
|
Fleet Owner
Joined: Mar 2003
Posts: 24,724
Likes: 74
From: Blue Hill Township
I finally got the compressor running good tonight. I fought with the dang motor and trying to get it to run nicely last weekend. I went out there tonight and reset the mixture, choked her and she fired right up. I need to get a different gauge setup and then find a different way to mount the throttle solenoid/cable but other than that she is good to go. I am quite impressed with how much air it will move for what it is. I'll try and get a picture of it up tonight or tomorrow.
