In-tank pump
Thread Starter
|
Elder User
Joined: Aug 2007
Posts: 629
Likes: 0
From: South-Central Kentucky
I've about decided to do it that way. It may not be as fancy as some of the other in-tank mods that some of the guys on here have done, but it is cheaper(actually it's free) since I already have the tank from the V-10. Now all I have to do is run the extra wiring, and I should have a relay laying around that I can use and enough wire to take care of it.
Lead Driver
Joined: Jun 2003
Posts: 8,298
Likes: 25
From: Damon (South East Texas)
Here is a picture of the pump. Dan(Kwik) said that the only thing that he would be worried about would be a plastic line rupturing?
The best way to describe this is that it sits down inside a plastic bowl in the tank with a lid screwed on, and the return line also comes into the bowl rather than the tank.
The best way to describe this is that it sits down inside a plastic bowl in the tank with a lid screwed on, and the return line also comes into the bowl rather than the tank.
