Wiring Harnesses
Part#'s listed below
E5TZ14401W - Underdash wiring harness
E5TZ12A581BH - Underhood wiring harness
E6TZ9D930C - Fuel Injection wiring harness
E1TZ14A318A - Door window wiring harness
E1TZ14A318B - Door lock wiring harness
If anyone knows where I can find these wiring harnesses please let me know. The truck is a 1985 F150 XLT Lariat with 5.0 EFI, AOD trans, w/dual tanks and all of the interior lighting, tilt, cruise, power door locks, power windows, and a/c, it was manufactured 1/85. Or if someone is parting out a simular truck that has a good harness I would like to replace the complete wiring harness in the truck. I need the underhood wiring harness and fuel injection harness the worst. If anyone can help it might save whats left of my hair as this truck is making me pull it out in handfulls.
The Fuel injection harness I left behind as the aluminium housing was just attached.
I tried really hard to remember because I failed to print out what you needed.
I can go back and get much more like the underdash harness if you like.
I can't remember if it had electric door locks etc.
Please contact me directly rather than on here pleaese.
http://www.clubfte.com/users/mil1ion/2cents.gif
[font color=red]Dennis
FTE Assistant Administrator
[/font]
[link: motorhaven.autoanything.com|How YOU Can Support This Site]
http://www.clubfte.com/users/mil1ion/canada_flag_animated.gif
[link:www.clubfte.com/users/mil1ion/Mil1ion.html|My Website,"North Of The 49th"]
[link:www.ford-trucks.com/guidelines.html|Club FTE]
http://www.clubfte.com/users/mil1ion/Minimorleytruck.JPG
[font color=blue]78 F-150 429CJ,Silver,Explorer Pkg.
64 1/2 Mustang Pre-World's Fair Car #8092
68-Mustang 289 2v-Sunlit Gold
[/font]
I know this thread is over 30 days old but maybe you can help
I also have a 1987 XLT Lariat 5.8L HO 4BBL, I am looking for
engine compartment wiring harness or like you mentioned under
hood, I dont have a part number for it mine has the 3 small
connectors close to the thru fire wall connector with fried
wires and no insulation.
I tried some local junk yards but all had the harness cut up
in many places.
Let me know if you know where and how much for it.
Thanks
Xavier




