My Frankenstien
Thread Starter
|
Posting Guru
Joined: Apr 2007
Posts: 1,191
Likes: 0
From: Lockport, NY
My Frankenstien
I have not posted this here yet so I thought I would grace you with my presence 
here is my 78 Bronco that I am bringing back from the dead with parts from my other trucks and a 351W out of my street rod
it was a rusty, crusty pile of poo when I bought it for $700 with a blown motor, but it called out to me and I had to have it, the project stalled for a bit when I bought a 76 F250 4x4 Hi-boy but I am now back on track and using the 250 for parts (I broke it out playing with it) I hope you guys like it. Later...Rick
here is my 78 Bronco that I am bringing back from the dead with parts from my other trucks and a 351W out of my street rod
it was a rusty, crusty pile of poo when I bought it for $700 with a blown motor, but it called out to me and I had to have it, the project stalled for a bit when I bought a 76 F250 4x4 Hi-boy but I am now back on track and using the 250 for parts (I broke it out playing with it) I hope you guys like it. Later...Rick
Thread Starter
|
Posting Guru
Joined: Apr 2007
Posts: 1,191
Likes: 0
From: Lockport, NY
Yea they are the one the factory should have used if you ask me,
and no I didn't put new quarters on it, I was scrapping an old Chevy Corsica my mom left here, so I cut off any sheet metal and any other parts I could use and I made all my own patch panels, welded it all up and used very little bondo, I had ground out places that had over a half inch of bondo in them ??? later I traded my 96 s-10 blazer for a 76 F250 4x4, drove that until I broke it out beating on it, now I am using parts from that too
it is starting to come together nicely and I am very pleased with it so far
and no I didn't put new quarters on it, I was scrapping an old Chevy Corsica my mom left here, so I cut off any sheet metal and any other parts I could use and I made all my own patch panels, welded it all up and used very little bondo, I had ground out places that had over a half inch of bondo in them ??? later I traded my 96 s-10 blazer for a 76 F250 4x4, drove that until I broke it out beating on it, now I am using parts from that too
it is starting to come together nicely and I am very pleased with it so far
