will this really work for me?
Thread Starter
|
Elder User
Joined: Aug 2006
Posts: 813
Likes: 1
From: foristell, missouri
will this really work for me?
i am rebuilding a 351w, could i put gt40 heads and then also put the gt40 intake on it without it flowing to much for my injectors? thanks guys
'90 f-250 4x4 351w 5-speed
'90 f-250 4x4 351w 5-speed
Moderator
Joined: Jun 2003
Posts: 3,547
Likes: 71
From: Calhoun GA
Depends on what the rest of the build is. If this is a speed density application, the fuel pressure is going to be critical; you want to make sure it doesn't drop off under heavy throttle/open loop conditions. An adjustable fuel pressure regulator can suffice, in some cases, before aftermarket tuning is needed.
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Should be no problem with the stock cam, with something else in there you'll stretch those squirters for all they're worth at higher rpms. The adjustable FPR is good insurance, though you'll need a wideband O2 sensor to know how much it needs to be adjusted.
Thread
Thread Starter
Forum
Replies
Last Post
Caveman2851
1987 - 1996 F150 & Larger F-Series Trucks
17
Feb 4, 2011 10:27 AM
mikepedersen17
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Jan 6, 2011 10:15 PM
Redneck1465
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
19
Jul 30, 2008 12:37 PM
DT 466Man
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
29
Nov 16, 2003 05:35 PM
