Can you get a papershop? There is/was a guy in there named Tinys slowplow parts I got a 7.5 Meyer off of him at a very fair price and he also had alot of parts.
Let me know if you can't get a papershop and I will try for you.
Glen
05 F-350 4x4 Reg Cab PSD 6Spd.

 

MBBCOP:

I got the truck w/ plow and salt spreader I advised you about. Salt spreader has remote start in the cab or you can mannually at rear of unit outside. Put in new batter and everything operates as it should. Lubed all the chains and the everything runs as it should. Let me know if still interested.

Coneynew

 

MBBCop:

I sent you a PM, but you can also check out my gallery under 1986 F-250 4X4, not my 1985 F-350 for pics.

Coneynew

 

Looking for one 235/75R15 tire. Factory size for most f150's, but need for recently acquired jeep. Will consider any tread pattern, but prefer decent life remaining. Anybody got some off a truck they lifted?

 

I'm also looking for any jeep cj's that are for sale, or could be for sale. Looking for beat up rusty junk for parts, nothing nice. If anybody knows of any, hit me with a PM. Also still have tailgate trim for 82-86 F series, decent shape, make offer.

 

i have a bedliner that i pulled out of my 97 350. its a duraliner over the rail style and has a ford emblem in the bulkhead. towards the front on each side, theres a 1x2 foot square hole cut in it for some reason. it was there when i got the truck. i think i have all of the fasteners, but i dont have the tailgate piece. im keeping that. im in central bucks county around warrington. if anyones interested, PM me. ill sell it for like $100 bucks OBO.

 

I have black running boards with lights that were on a 1998 F-150. They were used but in good condition. I purchased them for my F250 but due to a fire I now have a 2005 F350. I want to get rid of them so I don't have to look at them and then I start thinking about my Silver F250 that I miss every day! The price is Best Offer you take them. If interested please let my know.

 

I'm looking for an older truck project that is close to being a runner. Really want something from 48-56. Doesn't have to be pretty just a truck I can have ready for summer since my other projects are long term. If you see or know of anything give me a shout. Thanks!!

 

I'm going to throw another one out here, maybe I'll have some luck, since i'm not having any locally. I'm looking for a used 16-20 foot car OR skid steer trailer. Must be 80" min between fenders, no deckovers. Need full deck, as my tractor is a narrow front and open will not work. Prefer 8-12k GVWR, but am willing to consider quality 7K car trailer. Also, no homemade stuff. Thanks in advance.

 

I've got a black front bumper with holes for driving lights for 04-05 F150. Came off a 05 FX with @ 5000 miles. Been sitting in my basement for over year now for a project I'm just not going to do now. Also have all the mounting brackets so this can be put on 06-07 models. Also have the lower valance. Minor rocks dings but no dents or damage.

 

Cancel my post #40, I found a trailer. Any leads on rusty junk jeeps will still be appreciated.

 

WANTED: Bedliner to fit a 1988 8' bed, over rail or under. Perefer one with no holes however if holes are small I will reseal them with undercoating. Needed asap.

 

MBBCop:

I'll check my local salvage yard, they always seem to have them

Coneynew

 

Spare tire holder (for under the rear gas tank).

 

I don't know the seller, I can provide you with a link to the truck through email.


This a Texas truck. Although it is in Pennsylvania it has never saw the corrosive salted roads of winter time. This truck is in indoor storage in Latrobe, PA. Aproximatley one hour east of Pittsburg. The engine is a 390 and about the only thing stock in it is the block and crank. It was built along the lines of Edelbrocks Performer RPM product line. I estimate I spent $3000-$4000 on parts for the engine. The heads alone were $1100. There are too many parts to list. The rest of the truck is pretty much untouched. The bed of the truck does have some surface rust, but is far from being a rust bucket. I basically classify this a restoration in progress. It is a 4 speed standard transmission. 1st gear is a granny gear. 4WD of course, although the hubs need replacing. The tires on it are pretty bad but I have a set of 4 brand new ones to replace them. I am moving in a few months and need to get rid of this truck. I am asking for $2500 for it. That price is firm, so dont bother trying to haggle me down. The only trade I am willing to consider is if you can hook me up with a great discount on home gym equipment. There is an oil leak from what I suspect is the rear main seal on this. Truck is being sold as is. I will get the tires changed though. This truck is not road legal, although there is an area where it can be test drove. The buyer assumes all responsibility for getting this truck delivered, although I will certainly assist the people that will be shipping the truck. IM me with any question.

Yes, the title is legally transferable.