Oil Pressure Sender Question
Elder User
Joined: Feb 2000
Posts: 601
Likes: 1
From: South Sioux City, NE USA
Oil Pressure Sender Question
Does anyony know the thread pitch and diameter of the oil pressure sending unit on a late model 302?
This on an '89 F250. I was going to replace the factory guage with a real one, but they did not give me the proper adapter in the kit (what do you expect for $7, anyway). So, if any one knows, please let me know.
Thank you.
Roger Lane
Test Analyst
Sr. Automated Test Engineer
IBP, Inc.
This on an '89 F250. I was going to replace the factory guage with a real one, but they did not give me the proper adapter in the kit (what do you expect for $7, anyway). So, if any one knows, please let me know.
Thank you.
Roger Lane
Test Analyst
Sr. Automated Test Engineer
IBP, Inc.
Elder User
Joined: Feb 2000
Posts: 601
Likes: 1
From: South Sioux City, NE USA
Oil Pressure Sender Question
About the only thing I have going for me right now is that I have a 302 block on the stand in my garage. So all I had to do was to take the adapters that came w/ the new guage and see if they fit. Which, of course, they didn't. I used to have an old sending unit laying around the garage somewhere, I'm going to find it and take it to the hardware store and find what I need.
Thanks for all the help.
Roger Lane
Test Analyst
Sr. Automated Test Engineer
IBP, Inc.
Thanks for all the help.
Roger Lane
Test Analyst
Sr. Automated Test Engineer
IBP, Inc.
Thread
Thread Starter
Forum
Replies
Last Post
