Id'ing my 351
Thread Starter
|
Post Fiend
Joined: Jan 2000
Posts: 5,330
Likes: 17
From: Dryden, ON, Canada
Id'ing my 351
I'm trying to date my 351W, according to the sticker on the valve pan cover, it's a 92 Interceptor engine, but, my Haynes manual says that the 302 and 351 went to a 1 piece rear main seal at the same time. It has all the interceptor goodies on it, and I know it is one, so I'm thinking that stupid manual is wrong, which wouldn't be the first time. Where is the casting number on this block so that I can date the dang thing?
Evan MacDonald
82 F100 FlareSide 2wd
HD 300-6 9.5:1 CR
Clifford 270H cam
Hedman Hedder
SBC valved 66 240 head
NP435(6.69 low)
3.55 Geared ARB'd 9"
31x10.50/15 Cooper Discoverer LT's
Evan MacDonald
82 F100 FlareSide 2wd
HD 300-6 9.5:1 CR
Clifford 270H cam
Hedman Hedder
SBC valved 66 240 head
NP435(6.69 low)
3.55 Geared ARB'd 9"
31x10.50/15 Cooper Discoverer LT's
