4" lift
Post Fiend
Joined: Jan 2004
Posts: 5,377
Likes: 2
From: Elkhart IN
I actually didn't use any bolts putting it back together. I welded the buckets to my frame. I wouldn't suggest that unless you really trust your welding though.
If you look at this picture, you can see where I welded it all along the edges, and welded around the bolt holes. (excuse the crappy looking tubing, I ripped it with a dirty torch tip)
If you look at this picture, you can see where I welded it all along the edges, and welded around the bolt holes. (excuse the crappy looking tubing, I ripped it with a dirty torch tip)
Posting Guru
Joined: Nov 2006
Posts: 1,231
Likes: 0
From: Riverview, FL
Ok, I see now. I was planning on just dropping it down to the lower holes and making a bracket for support. After thinking more about it and looking at it, it will drop it down about 4". I would end up having to buy more parts than I wanted and would probably be cheaper to just buy a lift.
Thread
Thread Starter
Forum
Replies
Last Post
mark460
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
14
Jun 2, 2016 03:06 PM
xjpilot
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
15
Dec 18, 2011 11:06 PM
racerwad
1967 - 1972 F-100 & Larger F-Series Trucks
1
Feb 27, 2005 08:29 AM
