Introducing myself
Thread Starter
|
New User
Joined: Apr 2008
Posts: 1
Likes: 0
Introducing myself
At age 73 I am in the process of building a 1969 Ford F100 - This truck was so rusted out it was beyond repair. My sons recognizing that I have owned the truck since 1971, said dad you can just put it out in the dump. So here I am I have cut out so much rusted metal it is just unbelievable, but I will drive it again I am determined. The fact is, I love working with metal, I make parts out of 16 Gauge steel and have borrowed a lot of salvage metal from an old school bus. My problem is that the work I do I am doing to last far far longer than the good Lord will probably ever give me. I have documented the rust that I cut out in a great lot of photos. One day at a time.
Make-it-go
Make-it-go
Post Fiend
Joined: Feb 2000
Posts: 11,496
Likes: 6
From: Kansas
Sounds like quite the project. 
You can finds lots of help in our tech forums and this would be a good one: Paint and Bodywork - Ford Truck Enthusiasts Forums When you get it done you will know you have really done something.
You can finds lots of help in our tech forums and this would be a good one: Paint and Bodywork - Ford Truck Enthusiasts Forums When you get it done you will know you have really done something.
Thread
Thread Starter
Forum
Replies
Last Post
