302 RANGER SWAP
Thread Starter
|
Senior User
Joined: Aug 2001
Posts: 213
Likes: 0
From: Six Shooter Junction
302 RANGER SWAP
My brother and I are planning on putting a 302 in his 91 2wd ranger. Has anyone done this before, if so what kit did you use and any tips that will make the istallation go faster.
Also plan on souping it up a little bit, i belive the block were getting is an 85 but will be carb. Any suggestions or tips will be great, all i do is 460 stuff so the 302 is pretty new to me.
Oh yeah it will be converted to 4wd sometime after the 302 swap.
Thanks in advance
Chase
1979 F-250 4x4
71 460 Holley650, MSD OFFROAD, L&L Headers
C6-B&M Transpack
Dana HD44Front/60Rear
35 inch Goodyear Implement Tires
4 inch Skyjacker System
Much more to come
Also plan on souping it up a little bit, i belive the block were getting is an 85 but will be carb. Any suggestions or tips will be great, all i do is 460 stuff so the 302 is pretty new to me.
Oh yeah it will be converted to 4wd sometime after the 302 swap.
Thanks in advance
Chase
1979 F-250 4x4
71 460 Holley650, MSD OFFROAD, L&L Headers
C6-B&M Transpack
Dana HD44Front/60Rear
35 inch Goodyear Implement Tires
4 inch Skyjacker System
Much more to come
Senior User
Joined: Jan 2002
Posts: 322
Likes: 0
From: Gloucester USA
302 RANGER SWAP
that is a great site. I was thinking of what car to be my next project to put the 302 I'm building in, and that convinced me to put it in a Ranger :-) I was thinking of something light to use to drag race in, but not a Mustang. They're too common and too unimaginative. So its now either a Ranger or a Pinto. Whichever I can find when the time comes to buy one!
Thread
Thread Starter
Forum
Replies
Last Post
