new guy here
Thread Starter
|
New User
Joined: Mar 2008
Posts: 4
Likes: 0
new guy here
Hello all, just wanted to say hi from jersey. I have an 84 F250 4WD and getting ready to rip apart the front end to replace all the bushings, ball joints and such. Benn doing a lot of searches and wanted to thank Justshootme 84 for his homemade tool idea. This truck is a major POS but I paid $500 for it and it runs so good. I've been restoring Jeeps and Chevys for along time and this will be the first Ford I ve ever owned. I've ordered everything from LMC truck, but one thing i can't find is the urethane axle pivot bushings. Only way i see them is with a whole new lift kit, and I'm not doing that. Any sources?
Again just wanted to say thanks for a great forum.
Again just wanted to say thanks for a great forum.
pedant
Joined: Jan 2008
Posts: 23,576
Likes: 40
From: EXTREME southwest CT
Google works too!
http://www.jackit.com/bushings/ford_bushings.htm#axle
For one...
https://www.ford-trucks.com/forums/6...-bushings.html
Welcome to FTE!
http://www.jackit.com/bushings/ford_bushings.htm#axle
For one...
https://www.ford-trucks.com/forums/6...-bushings.html
Welcome to FTE!
Thread Starter
|
New User
Joined: Mar 2008
Posts: 4
Likes: 0
Yea Stosh Ive been using the search tool, said that in my first post above. I was wondering if you guys had a preferred vendor thats all. Ive been on PBB's for a while now. But again thanks. Not looking for a flame war here just curious about vendors.
