Ignition module

Reply Subscribe

Thread Tools

Search this Thread

Mar 25, 2008 | 10:57 PM

datzsun

Thread Starter

New User

Joined: Jun 2003

Posts: 11

Likes: 0

Ignition module

How do I replace the ignition module on my Big Bronco, 5.8? Is there a special tool to remove it or do I need to turn the distributor? If so, how do I do that without messing up the timing?

Thank you.

Mar 26, 2008 | 09:29 PM

Aciancio

Senior User

Joined: Sep 2006

Posts: 282

Likes: 0

From: Broken Arrow

what year? carb or EFI?

Mar 26, 2008 | 09:32 PM

Aciancio

Senior User

Joined: Sep 2006

Posts: 282

Likes: 0

From: Broken Arrow

oh ya, if you need to move the distributor make a mark on it and the block using a fine point sharpie, then just line them back up.

Mar 26, 2008 | 09:44 PM

b4hntn

Posting Guru

Joined: Apr 2005

Posts: 2,018

Likes: 0

From: Longview, TX

I THINK I remember the distributor mounted ignition module has torx screws. I know the remote (fender mount) is a thin wall deep socket.

Mar 26, 2008 | 10:52 PM

datzsun

Thread Starter

New User

Joined: Jun 2003

Posts: 11

Likes: 0

Hi,

It's a 1991 EFI. Looks like three screws, one is accessible, the other two are not. Looks like you might have to turn the distributor in order to access.