Engine swap
Thread Starter
|
Senior User
Joined: Feb 2008
Posts: 109
Likes: 0
From: south east oklahoma
Engine swap
I have an 82 half ton 4x4 with a 302. I also have a wrecked 96 bronco with 351w EFI. We have intakes and oil pans and it will bolt up to the tranny. My question is will the EFI engine run with the carb intake. I think it will but would appreciate some info.
Moderator
Joined: Jan 2001
Posts: 56,984
Likes: 2,738
From: Virginia
Yes it will. You will need an older type distributor for the 351w(the 302 dist won't work), and add a electric fuel pump to the truck or swap the 302 timing cover with it's two piece pump eccentric and fuel pump mount, onto the 351w. Be careful with the waterpumps and fans. If the 351w has a serpentine belt setup, then the waterpump and the fan turn backwards compared to the older v-belt setup.
Thread
Thread Starter
Forum
Replies
Last Post
EvinrudeDude300
1987 - 1996 F150 & Larger F-Series Trucks
23
Mar 3, 2025 12:28 AM
Bigblockexplorer
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
Feb 2, 2008 02:09 PM
mudadiction
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Feb 28, 2006 12:37 PM
