rocker ams and push rods
Thread Starter
|
Senior User
Joined: Jan 2001
Posts: 223
Likes: 0
From: Coquitlam, BC Canada
rocker ams and push rods
I have been hearing more ticking or clacking noise coming from the engine and I beleive it is coming form the rocker arms. My question is, is it ok to just replace the push rods and rockerarms and not the lifters?
Thanks
Joe
1979 F-250 2wd 400
Thanks
Joe
1979 F-250 2wd 400
Yes. 
Laughing Gas
Joined: Jul 2002
Posts: 843
Likes: 1
From: USA
rocker ams and push rods
Lifters are cheap, why not replace them at the same time. You DO NOT have to pull the intake to do this. A flexable lifter puller tool and lot of patience and they can be bought through the heads.
Thread Starter
|
Senior User
Joined: Jan 2001
Posts: 223
Likes: 0
From: Coquitlam, BC Canada
rocker ams and push rods
>Lifters are cheap, why not replace them at the same time.
>You DO NOT have to pull the intake to do this. A flexable
>lifter puller tool and lot of patience and they can be
>bought through the heads.
You can do that?, I didn't think there was any hole big enough to pull them out of?. I'll have to check that out, thats why I didn't want to replace them right now.
Thanks that sound pretty good!
:-)
Joe
>You DO NOT have to pull the intake to do this. A flexable
>lifter puller tool and lot of patience and they can be
>bought through the heads.
You can do that?, I didn't think there was any hole big enough to pull them out of?. I'll have to check that out, thats why I didn't want to replace them right now.
Thanks that sound pretty good!
:-)
Joe
Thread
Thread Starter
Forum
Replies
Last Post
doug42190
6.0L Power Stroke Diesel
12
Jun 10, 2016 10:25 AM
bjde0b
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Jul 15, 2009 06:37 AM
tweakingit
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
1
Nov 3, 2003 09:43 AM
foxs55
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
Feb 17, 2001 02:03 PM
