Leveling kit and handling

Reply Subscribe

Thread Tools

Search this Thread

Feb 17, 2008 | 09:39 PM

dfishrmn88

Thread Starter

Senior User

Joined: Jan 2005

Posts: 277

Likes: 1

From: San Antonio, Texas

Leveling kit and handling

I just installed a Auto Spring 2" leveling kit on my '05 Scab 4x4. Have not had the alignment done yet but have noticed the front end feels different when turning. Kind of like a slight binding. This happens only at low speeds, at highway speed it feels like stock.
Has anybody else noticed this or is it something I need to address besides the alignment. What might cause this if it is not normal after installation? I would appreciate anyones experiences with these kits.

Feb 18, 2008 | 12:43 AM

mattd17

Fleet Mechanic

Joined: Dec 2004

Posts: 1,365

Likes: 6

From: Ketchikan, AK.

its probably because your wheels are toed in slightly, so they are essentially dragging around the corners.

Feb 18, 2008 | 07:12 AM

dfishrmn88

Thread Starter

Senior User

Joined: Jan 2005

Posts: 277

Likes: 1

From: San Antonio, Texas

Hope that's it. Am having the alignment done this afternoon. Thanks.

Feb 18, 2008 | 10:42 PM

Ricky Jr

New User

Joined: Feb 2008

Posts: 5

Likes: 0

Its your toe end thats out of align. I have a auto spring 2.5 inch on mine and it did that to. When i got it align it stopped and turned a lot smoother.

Feb 18, 2008 | 11:13 PM

DaMole

Posting Guru

Joined: Jan 2006

Posts: 1,314

Likes: 0

From: Outer Banks, NC

Like everyone else has said it is most likely the alignment. The AutoSpring spacer should no change your ride at all.

Feb 19, 2008 | 07:17 AM

dfishrmn88

Thread Starter

Senior User

Joined: Jan 2005

Posts: 277

Likes: 1

From: San Antonio, Texas

You are right sir! Had the alighment done and it stopped the problem. The tech said my alignment was out 7 degrees or 3/4"! The tires were starting to get bit after only about 50 mi of driving on them after the install

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump