CHI Manifold
Thread Starter
|
Postmaster
Joined: Aug 2001
Posts: 4,270
Likes: 5
From: Delaware
CHI Manifold
I just got a note from John at CHI about an idea that I had.
I asked if it was possible to mill a CHI manifold for 185cc CHI heads on a 400, so that it would fit 2V heads.
This was his answer:
"Id say we can mill the 185 to suit the 2V heads without a problem. I have not tried as no one has ever ordered one."
That means that anyone who is building an Aussie headed or 2V headed 400, can have the best manifold available without adapter plates.
I asked if it was possible to mill a CHI manifold for 185cc CHI heads on a 400, so that it would fit 2V heads.
This was his answer:
"Id say we can mill the 185 to suit the 2V heads without a problem. I have not tried as no one has ever ordered one."
That means that anyone who is building an Aussie headed or 2V headed 400, can have the best manifold available without adapter plates.
