signal switch
Thread Starter
|
Senior User
Joined: Oct 2006
Posts: 217
Likes: 1
From: north battleford
signal switch
my turn signal switch is binding turning right(goes in if forced).just had the ign tumbler replaced and am sure it worked fine before.hoping there is dirt logged in there from cleaning the column.anything more than removing steering wheel to undo switch.any help would be a appreciated,
thanks ,
andy
thanks ,
andy
Moderator
Joined: Jan 2001
Posts: 56,995
Likes: 2,741
From: Virginia
I would pull the steering wheel, and then look the cancel mechanism over. It's obvious that something was not put back together correctly when the tumbler was replaced, although I don't know why they pulled the steering wheel to replace that.
