Building a 460

Reply Subscribe

Thread Tools

Search this Thread

Feb 14, 2000 | 05:44 PM

Tony

Thread Starter

New User

Joined: Jun 1999

Posts: 23

Likes: 0

Building a 460

Nov 27, 2001 | 03:08 PM

natesford

New User

Joined: Nov 2001

Posts: 7

Likes: 0

Building a 460

Hey guys I was just wondering if their is any thing you could do to stroke a460. Or how far can it be bored and what size in c.i. would this make it.

thanks

Nate

Nov 27, 2001 | 06:09 PM

bigsnag

Posting Guru

Joined: Apr 2000

Posts: 1,249

Likes: 2

From: Pryor

Building a 460

Check out Coast High Performance. http://www.coasthigh.com They have several strokers available off the shelf as well as just about any custom stroker you can think of. Most 460 blocks can be bored and stroked to 557 cubic inches.

JJ

Nov 30, 2001 | 09:07 AM

Just Strokin

Post Fiend

Joined: Nov 2001

Posts: 6,748

Likes: 118

From: Tallassee, ALabama

Building a 460

To build a 460 over say 528cid takes a high dollar steel crank. Ford SVO has a cast steel crank for like 750 that you can go to 514 without big bucks.

http://www.oemfordparts.com/partdetails.asp?PartID=1222&CategoryID=8

http://www.oemfordparts.com/partdetails.asp?PartID=1218&CategoryID=8

Reply Subscribe