When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I 've got her going....After a yr setting in my 69 F-250, she is firing on all 8 cylinders...and she sounds like a nascar starting up (with all the rumble too). She's a 460 bored 30 over with a edelbrock performer intake, a holley 650 Double pumper on it, and it runs great.. Didn't need to adjust any thing.... hooked up to a C-6 and a np-205gear transfer case to a dana 60...It's all so a 4 by 4......she also has 35" tires on her W/ 4.10 gears....
but my question is how much hp and torque am I going to have?
I don't know how to put pics on here, so I can't show you what it looks like....e-mail me and I;ll send one to ya...
[updated:LAST EDITED ON 22-Jan-02 AT 00:48 AM (EST)]You can put pictures in your users gallery. Its located under the message board, which is in the upper right corner on your screen. Once you click on user gallery, click on "manage/ create" and then follow the steps.
I can't say for shure, you don't give very many details about the engines internals. According to my book a stock 8:1 460 has
216hp and 366ft lbs. So Assuming that it's a stock rebiuld with 8:1
compression and the Edelbrock intake with a 4 barrel Holley
I think 225-235hp and 375-385ft lbs is a reasonable guesstimation.
I could be wrong though.