new tip!!
Thread Starter
|
Posting Guru
Joined: Mar 2007
Posts: 1,905
Likes: 2
From: East Peoria, IL
new tip!!
Well, my new tip came in unexpectedly today. It was a nice surprise when i got off work. Went outside with the sawzall and installed her up. However I do not have a pic of the installed product, my cameras battery was dead and it was too dark for a good cell pic.
but anyways, to hold you off until the finished product, here is a little comparison pic ( sorry about cell quality ). Next to it is my size 12 docs for comparision. . .
oh and sorry about starting a thread, im real excited about it, i finally got rid of my cheap dinky one that was 5" ID and 5" OD and only 12" long
but anyways, to hold you off until the finished product, here is a little comparison pic ( sorry about cell quality ). Next to it is my size 12 docs for comparision. . .
oh and sorry about starting a thread, im real excited about it, i finally got rid of my cheap dinky one that was 5" ID and 5" OD and only 12" long
Post Fiend
Joined: Feb 2006
Posts: 11,892
Likes: 2
From: Middle Tennessee
Bet that was a chilly operation. Glad ya got it on there. I did my MKO in 20s with 15 mph winds so I know how you feel. I felt like a popsicle when it was done, but it was going on.
Sadly, I have had people tell me my 6" tip looks like a ricer fartcan tip sticking out of there. Hmmm. I don't remember ever seeing a 6" tip on one, and never a 5" exhaust. Opinions vary.
Sadly, I have had people tell me my 6" tip looks like a ricer fartcan tip sticking out of there. Hmmm. I don't remember ever seeing a 6" tip on one, and never a 5" exhaust. Opinions vary.
Post Fiend
Joined: Sep 2006
Posts: 5,584
Likes: 0
From: Millbrook Alabama
Originally Posted by Tenn01PSD350
Sadly, I have had people tell me my 6" tip looks like a ricer fartcan tip sticking out of there. Hmmm. I don't remember ever seeing a 6" tip on one, and never a 5" exhaust. Opinions vary.
GO BIG, OR GO HOME.
looks great Nic. by any chance do you know if they had a 4" inlet to 6" that is 24-28" long? I need two for my horizontal stacks (see gallery)
Posting Guru
Joined: Jul 2006
Posts: 1,515
Likes: 0
From: Jonestown PA
Trending Topics
Post Fiend
Joined: Apr 2007
Posts: 7,241
Likes: 1
From: Powder Springs, East TN
Thats one massive tip, it will look great when its on. Mike they are just jeolous over the size because there tips are too little 
.
.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Posting Guru
Joined: Mar 2007
Posts: 1,905
Likes: 2
From: East Peoria, IL
thanks for all the compliments guys
i have yet to get a pic on the truck it is snowy outside
and actually, all of you guys are a little off, its actually a 7" tip
as stated, go big or go home. i wanted the biggest tip around and it actually took me a while to find one.
and the other questino, its 22" long
i have yet to get a pic on the truck it is snowy outside
and actually, all of you guys are a little off, its actually a 7" tip
as stated, go big or go home. i wanted the biggest tip around and it actually took me a while to find one. and the other questino, its 22" long
If you dont mind me asking where did you get it
Elder User
Joined: Oct 2005
Posts: 578
Likes: 0
From: Cincy OH
Lookin for the biggest tip? Run a 36'' long 7'' mitre stack out the back!!!
Before you laugh too hard...it has been done...
Of course it was a goofy friend of a buddy, a 12V Cummins owner. Cut down a damaged mitre stack and rigged it as his tailpipe. Wow, talk about REDICULOUS!!!...
Before you laugh too hard...it has been done...
Of course it was a goofy friend of a buddy, a 12V Cummins owner. Cut down a damaged mitre stack and rigged it as his tailpipe. Wow, talk about REDICULOUS!!!...
Thread Starter
|
Posting Guru
Joined: Mar 2007
Posts: 1,905
Likes: 2
From: East Peoria, IL
nick-i got it from mkopower.com
kris-its an mko but i guess you know that now that i told nick where i got it
i like it better than running a cut down stack because it actually looks like a tip, it has slash cut rolled edges and its inlet is 5 so i dont have to buy an adapter or jimmy something up
kris-its an mko but i guess you know that now that i told nick where i got it
i like it better than running a cut down stack because it actually looks like a tip, it has slash cut rolled edges and its inlet is 5 so i dont have to buy an adapter or jimmy something up
Elder User
Joined: Oct 2005
Posts: 578
Likes: 0
From: Cincy OH
Originally Posted by nhill2090
i like it better than running a cut down stack because it actually looks like a tip, it has slash cut rolled edges and its inlet is 5 so i dont have to buy an adapter or jimmy something up