Replacing Gauges?
Thread Starter
|
Senior User
Joined: Oct 2004
Posts: 180
Likes: 0
Replacing Gauges?
Im Replacing My Banks Egt/boost Gauges Because They Wont Work With Six-gun Tuner Out Of Truck, What Should I Look For Since These Were Tied In Electrically To The Map Sensor And Tuner Itself. Mechanical Gauges Right? What Do I Need? Manifold Still Has Probe Will It Work With New Gauge Or Replace It, Doese New Pyro Come With Probe And Wiring And Boost Gauge I Think I Will Have To Tap Intake Elbow Right, Any Help Or Guidance Would Be Appriciated, Oh I Have 3-gauge A Pillar Pod With Trans Temp Wired Directly To Pan Already. Funny $2,000 Dollars For A Six-gun Bundle And The Only Thing Im Going To Keep Is Trans Gauge, Ehaust,and A-pillar Pod. Dont Think My Custom Tunes From Spartan Are Giving Me Everything With Six-gun Hooked Up Even If Its Just For Gauges Now...sorry Long Post Need Help..
Elder User
Joined: Sep 2007
Posts: 803
Likes: 1
From: S CAL
I would think that you will have to convert over to individual gauges. I also believe that you will have to buy the probes that match the gauges your going to use. The boost gauge is just a plastic line right from the intake elbow staight to the gauge. The pyro gauge is a electrical connection from the probe to the gauge and you will need to add power for it. The trans gauge sounds like you already have.
Thread
Thread Starter
Forum
Replies
Last Post
