Tire pressure light
Thread Starter
|
Senior User
Joined: Sep 2004
Posts: 178
Likes: 0
From: Brownsville, Texas
Tire pressure light
Does anybody know of a way to disable this light or at least to program the tires with a little bit of less air in them? I bought my truck lifted and with bigger tires (37X13.50R20) and 65psi in them is way to much!
Thanks
Thanks
Senior User
Joined: Jan 2004
Posts: 106
Likes: 0
From: Worcester
I read somewhere on the forum of a guy who put the tps sensors in a 2" abs pipe with caps on each end. On one end he installed a valve steam and aired up the pipe to 65lbs and stored it under the seat.
Thread Starter
|
Senior User
Joined: Sep 2004
Posts: 178
Likes: 0
From: Brownsville, Texas
I read somewhere on the forum of a guy who put the tps sensors in a 2" abs pipe with caps on each end. On one end he installed a valve steam and aired up the pipe to 65lbs and stored it under the seat.
Thanks
Senior User
Joined: May 2007
Posts: 446
Likes: 2
I read the thread with the canister idea. Not sure it was actually tried. Tech at the dealer said he didn't think it would work as the sensors would be too far from the recievers.
Someone suggested using the remote that sets the snensors place during a tire rotation from a rig that only uses 30 psi. I haven't even done the research to know if that remote exists.
Someone suggested using the remote that sets the snensors place during a tire rotation from a rig that only uses 30 psi. I haven't even done the research to know if that remote exists.
Thread
Thread Starter
Forum
Replies
Last Post
