Hmmmmm....
Thread Starter
|
Posting Guru
Joined: Nov 2005
Posts: 1,302
Likes: 0
From: Madison, SD
Originally Posted by Ford428CJ
You'll find they fastest FE's and the most HP there, known to exist on the face of this great world LOL. The guy done smoked his clutch LOL....
FE "Freakin Expensive"
Joined: Dec 2003
Posts: 6,461
Likes: 4
From: Smith Mountain Lake, VA
Well that was pretty cool of Wes calling his B*ll*****...LOL.... RWJ (Wayne) told Wes to call him out on a Dyno of his choice to run the motor on for $1000 if it would make 700+HP plus Wayne would put up the money for Wes and pay for the dyno time...
And Mark Artis said he would also back it with the same.... So we'll see if Wes calls this Turkey out, and if the guy is Stupid enough to try and go for it !!! LOL... I meen does this guy really think were all Dummies???
I was glad to see Wayne and Mark step up too the plate, to Offer Wes this chance to shut this Guy up.....LMAO!!!
I Love it!!!
RJ
And Mark Artis said he would also back it with the same.... So we'll see if Wes calls this Turkey out, and if the guy is Stupid enough to try and go for it !!! LOL... I meen does this guy really think were all Dummies???
I was glad to see Wayne and Mark step up too the plate, to Offer Wes this chance to shut this Guy up.....LMAO!!!
I Love it!!!
RJ
Needsmorecoffee.
Joined: Oct 2004
Posts: 3,624
Likes: 2
From: CT
Wes has some big names in his corner ready to back him up! And I'm sure a few more will step up if something comes out of the challenge. I don't have NEAR the resources and cash the big guys have but I'll throw in $100 if it goes down. I need the other $900 for parts sorry!!! 
Elder User
Joined: Mar 2004
Posts: 747
Likes: 0
From: Klamath Falls OR
Here are the links to that!
http://www.clubhotrod.com/forums/sho...t=32223&page=5
http://www.network54.com/Forum/74182...uy+is+smoking~
http://www.clubhotrod.com/forums/sho...t=32223&page=5
http://www.network54.com/Forum/74182...uy+is+smoking~
FE "Freakin Expensive"
Joined: Dec 2003
Posts: 6,461
Likes: 4
From: Smith Mountain Lake, VA
hey Wes...and you tell him in front of all his punk follower's, that he doesnt have a hair around his A$$ if he doent take you up on this.... I think Wes ...Its More Like Danny's D*ck shop!!! LOL
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Elder User
Joined: Mar 2004
Posts: 747
Likes: 0
From: Klamath Falls OR
Originally Posted by RapidRuss
hey Wes...and you tell him in front of all his punk follower's, that he doesnt have a hair around his A$$ if he doent take you up on this.... I think Wes ...Its More Like Danny's D*ck shop!!! LOL
FE "Freakin Expensive"
Joined: Dec 2003
Posts: 6,461
Likes: 4
From: Smith Mountain Lake, VA
Wes.....I really like how much Tact you had when you put the ***** too him....I had to laugh Bro.....cause I couldnt have been that graceful... I was in the USAF also....and I NEVER learned that kind of tact...
It was a sweet way of telling him his pr*ck was know tied in a knot.....and he had no way tp **** out of it!!! I loved it... i saw one of his croonies step up for a race...But If he belives in Dennies BS..the motor was probably built by Denny, and he was told it make 1200hp... LMAO!!!
It almost looks like a Denny's groupie match and some of the boy's like Scoot and polcat from this site and and a few others from Net54 to meet these Denny groupie's at a track.....Like they say..GO BIG OR GO HOME!!! LOL
Anyway Wes...you said it very well... My hats off to ya for useing some tact..
RJ
It was a sweet way of telling him his pr*ck was know tied in a knot.....and he had no way tp **** out of it!!! I loved it... i saw one of his croonies step up for a race...But If he belives in Dennies BS..the motor was probably built by Denny, and he was told it make 1200hp... LMAO!!!
It almost looks like a Denny's groupie match and some of the boy's like Scoot and polcat from this site and and a few others from Net54 to meet these Denny groupie's at a track.....Like they say..GO BIG OR GO HOME!!! LOL
Anyway Wes...you said it very well... My hats off to ya for useing some tact..
RJ
Elder User
Joined: Mar 2004
Posts: 747
Likes: 0
From: Klamath Falls OR
Originally Posted by RapidRuss
Wes.....I really like how much Tact you had when you put the ***** too him....I had to laugh Bro.....cause I couldnt have been that graceful... I was in the USAF also....and I NEVER learned that kind of tact...
It was a sweet way of telling him his pr*ck was know tied in a knot.....and he had no way tp **** out of it!!! I loved it... i saw one of his croonies step up for a race...But If he belives in Dennies BS..the motor was probably built by Denny, and he was told it make 1200hp... LMAO!!!
It almost looks like a Denny's groupie match and some of the boy's like Scoot and polcat from this site and and a few others from Net54 to meet these Denny groupie's at a track.....Like they say..GO BIG OR GO HOME!!! LOL
Anyway Wes...you said it very well... My hats off to ya for using some tact..
RJ
It was a sweet way of telling him his pr*ck was know tied in a knot.....and he had no way tp **** out of it!!! I loved it... i saw one of his croonies step up for a race...But If he belives in Dennies BS..the motor was probably built by Denny, and he was told it make 1200hp... LMAO!!!
It almost looks like a Denny's groupie match and some of the boy's like Scoot and polcat from this site and and a few others from Net54 to meet these Denny groupie's at a track.....Like they say..GO BIG OR GO HOME!!! LOL
Anyway Wes...you said it very well... My hats off to ya for using some tact..
RJ
FE "Freakin Expensive"
Joined: Dec 2003
Posts: 6,461
Likes: 4
From: Smith Mountain Lake, VA
As you well should Wes... I just heard from another forum Member, and they said its a quite as a mouse over there right now!!! LMAO!!! Where the hell did all his freakin groupies GO?? LOL..
maybe Denny's in the shop right now trying to figure out how to put a Turbine power support unit in a mini bike frame??? hey i always wanted to do that but with a go cart? Have any connections??
RJ
maybe Denny's in the shop right now trying to figure out how to put a Turbine power support unit in a mini bike frame??? hey i always wanted to do that but with a go cart? Have any connections??
RJ
Elder User
Joined: Mar 2004
Posts: 747
Likes: 0
From: Klamath Falls OR
Originally Posted by RapidRuss
As you well should Wes... I just heard from another forum Member, and they said its a quite as a mouse over there right now!!! LMAO!!! Where the hell did all his freakin groupies GO?? LOL..
maybe Denny's in the shop right now trying to figure out how to put a Turbine power support unit in a mini bike frame??? hey i always wanted to do that but with a go cart? Have any connections??
RJ
maybe Denny's in the shop right now trying to figure out how to put a Turbine power support unit in a mini bike frame??? hey i always wanted to do that but with a go cart? Have any connections??
RJ
No connections on the Turbine LOL Otherwise I would have one right now! LOL
Thread Starter
|
Posting Guru
Joined: Nov 2005
Posts: 1,302
Likes: 0
From: Madison, SD
Heck, I'm trying to buy the parts from him!!!!! LOL
Maybe he forgot the decimal point and it's making 98.0?????
All joking aside, the worst part is he has one huge following, and there are a bunch of kids defending him and saying it's true and that Wes is being mean!!!!!
Maybe he forgot the decimal point and it's making 98.0?????
All joking aside, the worst part is he has one huge following, and there are a bunch of kids defending him and saying it's true and that Wes is being mean!!!!!
Elder User
Joined: Mar 2004
Posts: 747
Likes: 0
From: Klamath Falls OR
Originally Posted by Dave Severson
Heck, I'm trying to buy the parts from him!!!!! LOL
Maybe he forgot the decimal point and it's making 98.0?????
All joking aside, the worst part is he has one huge following, and there are a bunch of kids defending him and saying it's true and that Wes is being mean!!!!!
Maybe he forgot the decimal point and it's making 98.0?????
All joking aside, the worst part is he has one huge following, and there are a bunch of kids defending him and saying it's true and that Wes is being mean!!!!!