Options for upgrading clutch.
Thread Starter
|
Elder User
Joined: May 2007
Posts: 544
Likes: 1
Options for upgrading clutch.
The ranger is going to need a clutch in the near future. Also in the near future it will probably be pulling a trailer more than normal as well. Now I know the normal clutch disc diameter is 8 7/8", but I've found a few clutch kits that bump it up to an 11" diameter.
I figured going with the 11" such as this http://www.autozone.com/R,APP354501/vehicleId,1942102/initialAction,partProductDetail/store,435/partType,00179/shopping/partProductDetail.htm would be better in a towing application. If there's another one to look at other than this please let me know. I'm simply curious if anybody else is running an 11" clutch and if there's anything I should know when installing it (if I need a different flywheel to match the 11" or anything else to that matter).
Thanks.
I figured going with the 11" such as this http://www.autozone.com/R,APP354501/vehicleId,1942102/initialAction,partProductDetail/store,435/partType,00179/shopping/partProductDetail.htm would be better in a towing application. If there's another one to look at other than this please let me know. I'm simply curious if anybody else is running an 11" clutch and if there's anything I should know when installing it (if I need a different flywheel to match the 11" or anything else to that matter).
Thanks.
