engine sizes
Post Fiend
Joined: May 2004
Posts: 5,277
Likes: 0
From: St George, SC I-95
360FE was a very common engine in 73-76 trucks. You can tell that its an FE engine because the valve cover bolts to the heads and to the intake. Maybe a better way to explain it is that the valve cover covers approximately 3/4" of the intake. Be very wary if the seller tells you its a 390. Its impossible to visually tell the difference between the 2 engines because a 390 is a 360 with a longer stroke.
The other engine choices were 300 inline 6 and 302 V8 if Im not mistaken.
The other engine choices were 300 inline 6 and 302 V8 if Im not mistaken.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
Originally Posted by gnwalker
must be FE, no 302 in pick ups til '78
Used in F100's only thru 1972.
1969/79 302 VIN engine code = G.
1973/76 V8 engines (VIN engine code in bold type): 302 G / 360 Y / 390 2V H / 390 4V M / 460 A or J
1977/79 V8 engines: 302 G / 351M H / 400 S / 460 A or J
240 I-6's used 1973/74 / 300 I-6's used 1973/79
Last edited by NumberDummy; Dec 26, 2007 at 02:29 PM.
