A Different Cab Light Tutorial
Thread Starter
|
Elder User
Joined: Dec 2004
Posts: 819
Likes: 3
From: Putnam Valley, New York
A Different Cab Light Tutorial
Hey guys,
Here is an excellent clearance light tutorial. It has a lot of pictures and exact measurements.
http://rides.webshots.com/album/174204062azrmKD?start=0
As I found out in a different thread, 5.5 inches from the windshield weatherstrip is too far back, and will make your lamps not sit flush with the roof. In fact, if you look in motomans tutorial,
http://www.emotoman.com/f250/lights/f250lights.htm
one of the last pictures is one of him "trimming" one of his lights in order to make is sit flush with the roof. I'm sure that with the proper location, the lamps will sit flush without any trimming.
RON
Here is an excellent clearance light tutorial. It has a lot of pictures and exact measurements.
http://rides.webshots.com/album/174204062azrmKD?start=0
As I found out in a different thread, 5.5 inches from the windshield weatherstrip is too far back, and will make your lamps not sit flush with the roof. In fact, if you look in motomans tutorial,
http://www.emotoman.com/f250/lights/f250lights.htm
one of the last pictures is one of him "trimming" one of his lights in order to make is sit flush with the roof. I'm sure that with the proper location, the lamps will sit flush without any trimming.
Last edited by Rongold; Dec 1, 2007 at 12:26 PM.
