hey guys... i need help mod gone wrong...
Logistics Pro
Joined: Nov 2006
Posts: 3,685
Likes: 374
From: Fallon,NV & Bainbridge OH
I was shaking my head in disbelief but belive me when I worked at a speed shop we had guys we called "street weenie's" that did things just that dumb. 15 years in law enforcement with the general public and not much surprises you anymore. Really was believing it until I read the sig, that kind of gave it up for me.
Great job, laughed like hell
Great job, laughed like hell
Elder User
Joined: Oct 2005
Posts: 578
Likes: 0
From: Cincy OH
Originally Posted by bdrummonds
well I think what we have here is a case of over siliconization of the compression ignition chamber, the reverse procedure for this is to apply a WHOSYERGENEDADRAMAIR, to the tail pipe at maximum thrust. by doing so you also polish the trailing edges of the ports which will improve laminar velocitific absolute drive efficiencey.
also check your SCA's when done to make sure your level is correct. I would also send an oil sample to blackstone, and tell them that you suspect your silicon levels to be high and could they confim.
also check your SCA's when done to make sure your level is correct. I would also send an oil sample to blackstone, and tell them that you suspect your silicon levels to be high and could they confim.
ROTFLMAO!!! That is too funny. As funny as the original post.Sounds like a Gene analysis...J/K Gene we all love you.
Would be too funny to actually send Blackstone a sample with 30% sand and ask if your K&N drop-in filter is working great...you just installed it last oil change and heard great things about it...too damn funny!
Lead Driver
Joined: Jan 2006
Posts: 6,267
Likes: 5
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Fords to Drive Before You Die
Joe Kucinski
3 Best / Worst Features Of The 2025+ Ford Expedition
Brett Foote
10 Ways Ford is LOSING to the Competition
Joe Kucinski
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
Elder User
Joined: May 2007
Posts: 936
Likes: 0
From: Carlos, MN
Originally Posted by IDPisan
1. Call a priest and give the 7.3 last rites
2. Get Drunk
3. Get a new friend
2. Get Drunk
3. Get a new friend
4. get all the sand out of everything
5. Buy a new powerstroke or cummins.
Last edited by RogueSpear2023; Nov 15, 2007 at 01:02 AM.
Postmaster
Joined: Jun 2006
Posts: 2,647
Likes: 0
From: Fulltime RVer
Originally Posted by powerstrokeddiesel
... We got a bag of sandblasting sand and hooked up into the intake and started the truck...
Home made hydrogen and 25 ft blackie
https://www.ford-trucks.com/forums/674283-home-made-hydrogen-and-25-ft-blackie-2.html
with your sand blast mod. With the correct amount of supplemental Hydrogen you can melt the sand and coat all the internal friction surfaces with a nice layer of glass which should provide enough wear resistance so that you'll have the first 5 million mile PSD!
The key here is to get the sand-to-Hydrogen ratio just right. If you begin to see some marbles coming out the tailpipe, that's a sure sign you're using too much sand and not enough Hydrogen. Now if your truck blows up and you never get to give one of these stupid posts again, that's a sure sign you used too much Hydrogen!!!
