Clutch Cylinders Identification
Thread Starter
|
Senior User
Joined: Jul 2001
Posts: 432
Likes: 1
From: West London, England
Clutch Cylinders Identification
Hi All
A previous owner of my truck fitted a hanging pedal assembly with a hydraulic clutch
I'm putting the pedals back under the floor but want to reuse the clutch cylinders
I'd like to know what these cylinders were originally from
They are both marked "Wagner Lockheed, USA"
The master is marked "FE-32761"
The slave is marked "FD-48909
I put some pictures in a gallery "Clutch Cylinders"
https://www.ford-trucks.com/user_gal...&albumid=30948
Dose anyone recognise them ?
A previous owner of my truck fitted a hanging pedal assembly with a hydraulic clutch
I'm putting the pedals back under the floor but want to reuse the clutch cylinders
I'd like to know what these cylinders were originally from
They are both marked "Wagner Lockheed, USA"
The master is marked "FE-32761"
The slave is marked "FD-48909
I put some pictures in a gallery "Clutch Cylinders"
https://www.ford-trucks.com/user_gal...&albumid=30948
Dose anyone recognise them ?
Cross-Country
Joined: Nov 2023
Posts: 74
Likes: 13
An 18-year-old post and no replies? Well, in the event that someone else is looking for answers to his questions, I can answer one: The Wagner-Lockheed FE-32761 master cylinder was used on the 1961 F250, for one application. Can't say one way nor the other on the slave cylinder.
Thread
Thread Starter
Forum
Replies
Last Post
Greyner123
1987 - 1996 F150 & Larger F-Series Trucks
2
Jun 24, 2025 06:12 PM
Tbanks1382
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
Apr 29, 2021 01:16 AM
