motor mounts replacement
Hotshot
Joined: Oct 2002
Posts: 18,488
Likes: 22
From: The Big, Oregon
motor mounts replacement
The absolute easiest way would be to use an engine hoist, but yo can use a jack. Place a piece of wood on the jack, and lift on the front pulley. Put just enough pressure on the jack to keep the piece of wood in place, and unbolt the large nuts holding the mount to the frame. Jack up until the mounts are just starting to lift clear of the frame, then undo the bolts holding the mounts to the engine. Reverse to install, and you are done!
Jared
Jared
