Flywheel ID needed- C4TE-6038-K

Reply Subscribe

Thread Tools

Search this Thread

Aug 12, 2001 | 08:33 AM

bill ballinger

Thread Starter

Freshman User

Joined: Apr 2001

Posts: 44

Likes: 0

Flywheel ID needed- C4TE-6038-K

It has a single bolt pattern and has a 12 inch friction surface, I tried an 11 inch on it and the pressure plate was too small to meet the bolt holes.

Aug 12, 2001 | 03:42 PM

bsprowl

Tuned

Joined: Jul 2001

Posts: 430

Likes: 0

From: Deatsville, AL

Flywheel ID needed- C4TE-6038-K

This may not be of any use but there was an 11 1/2 inch Long Style clutch from the factory on my '66 Galaxie 428.

Bob
'66 7 Litre, top loader, 3.25 Traction-lock, Sidewinder Intake, SCJ Exhaust
'88 F150 LWB 4x2, XLT Lariat, 302, 5 speed, 3.08
'99 Ranger, 4x2, 3.0, 5 speed, 3.73 posi

Aug 14, 2001 | 10:21 PM

jowilker

Fleet Owner

Joined: Jun 1999

Posts: 24,552

Likes: 74

From: Creedmoor, North Carolina

Flywheel ID needed- C4TE-6038-K

Aug 14, 2001 | 10:54 PM

bsprowl

Tuned

Joined: Jul 2001

Posts: 430

Likes: 0

From: Deatsville, AL

Flywheel ID needed- C4TE-6038-K

Just saw this on eBay.
48 - 72 FORD BUS TRUCK MARMON CLUTCH DISC Item # 594112434
Described as 12" clutch disc. 10 spline, 1 3/8 diameter.

Bob
'66 7 Litre, top loader, 3.25 Traction-lock, Sidewinder Intake, SCJ Exhaust
'88 F150 LWB 4x2, XLT Lariat, 302, 5 speed, 3.08
'99 Ranger, 4x2, 3.0, 5 speed, 3.73 posi

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump