Intake & Head Info
Thread Starter
|
New User
Joined: Jul 2002
Posts: 4
Likes: 0
From: Jamestown USA
Intake & Head Info
I'm trying to find out what this intake manifold and heads are and what they came off of. Intake- C7AE 9425-F Heads-C8OE 6080-N Any info would be appreciated Thanks Brian
Post Fiend
Joined: Feb 2000
Posts: 5,130
Likes: 8
From: Brea CA
Intake & Head Info
Oh boy Brian, you got some good stuff there! The intake is the later version of the 428 police interceptor manifold and the heads are from a 428 cobra jet. It's a super combo!
Barry
Barry
Thread Starter
|
New User
Joined: Jul 2002
Posts: 4
Likes: 0
From: Jamestown USA
Intake & Head Info
I guess I just got my one time "Good" Luck. I'm putting together a motor for my truck. It's a '77 HiBoy F-250 with a few mods. Dana 60 front out of a '78 250 I use to have. The rear is a Dana 70 out of a '78 350 Camper Special. It's got a 4" lift and 38" Swampers on it. Can't wait to get it running!!!!!! Thanks for all the info, it's greatly appreciated! Brian
Posting Guru
Joined: Aug 2001
Posts: 2,117
Likes: 0
From: Evanston, WY
Intake & Head Info
Brian,
Which 38's did you use, the radials or the original TSL? You got em on yet? Any pics?
Im building a 76 hi-boy, dana 60/60, lockers, 427 tunnelport, 4" lift, and am considering 38's. Sure would like to see the stance.
-Scouder
Which 38's did you use, the radials or the original TSL? You got em on yet? Any pics?
Im building a 76 hi-boy, dana 60/60, lockers, 427 tunnelport, 4" lift, and am considering 38's. Sure would like to see the stance.
-Scouder
Thread Starter
|
New User
Joined: Jul 2002
Posts: 4
Likes: 0
From: Jamestown USA
Intake & Head Info
The Swampers are Bias Plies 16x38.5x16.5 . There is plenty of room for under the fender wells for movement. I'm using a Skyjacker lift system . Now the swampers don't look as big as they did laying on the garage floor. Maybe i'll have to go to 39.5's or 42's ! I don't have any pictures yet. Brian
