Buzzer trouble!
Buzzer trouble!
Lead Driver
Joined: May 2007
Posts: 8,608
Likes: 13
From: Belair md
the tab is broke off the key cylinder, if you know how to pull it out, they are simple, if not i can post some pics tomarrow after work of how to, its very simple, pull the lower colum cover off, 3 phillips screws and the tilt lever, then lower the tilt all the way and remove the top piece of plastic, pull the shifter to 1st gear to make it simpler, once off, put it back to park then turn the key to run, under the cyclinder you'll see a hole with a detent ball in it, depress it and pull the key cylinder out, near the top of the hole will be a half moon piece of plastic with a metal tab, gurantee the ear is broke off and it just flops around, that is your problem, you can still order it from the dealer, i just pulledthe pin out of the connector on mine
Post Fiend
Joined: Oct 2003
Posts: 5,903
Likes: 1
From: MICHIGAN
.........or unplug it.
Very easy to do, look here:
https://www.ford-trucks.com/forums/4...-question.html
Very easy to do, look here:
https://www.ford-trucks.com/forums/4...-question.html
