Lifted?
Thread Starter
|
Elder User
Joined: Aug 2007
Posts: 571
Likes: 1
Lifted?
Q: What is the largest tire that I can fit on my stock rims without a lift?
??? A: 295's are a safe bet. But some trucks with the plow package can fit 305's with minimal rubbing. Make sure the tire manufacturer says that it is okay for THEIR tire to go on the 7" rim that the Super Duty wears.
??? A: 295's are a safe bet. But some trucks with the plow package can fit 305's with minimal rubbing. Make sure the tire manufacturer says that it is okay for THEIR tire to go on the 7" rim that the Super Duty wears.
So I found this information in the tech folder. I am running LT325/65R18 Nitto Grapplers. Looking at the pic below, could you say that I am running in a lifted vehical? Sales doc doesnt specify and I am unable to contact the OO. I initially
though that the 18s are what gives it that look. The 18s appear to be factory too.
Last edited by FORDSDOWNER; Sep 1, 2007 at 06:11 PM.
Thread Starter
|
Elder User
Joined: Aug 2007
Posts: 571
Likes: 1
Originally Posted by SUPERDUTY_untouchabl
Lifted or not thats a good looking truck.
ReAX, thanks for the reply on the lift. Is there any particular way I can tell by looking uder the truck?
Postmaster
Joined: Jan 2005
Posts: 4,743
Likes: 3
From: Peoria, IL
Your rear end doesn't appear to be lifted at all. You may have either a leveling kit or heavy service front springs on it though, as the nose seems a bit higher than stock which is unusual with an aftermarket front bumper (they usually make the front sit lower than stock). Look at the front springs and see if there is a donut shpard piece up above it, or post a picture of the springs themselves and the trailing arms and we can tell you if they are stock or not.
Post Fiend
Joined: Dec 2002
Posts: 6,245
Likes: 1
From: IL, USA
Those 18s are stock.
Looks like a stock height F-250 to me.
At the most a leveling kit. If you look at the front coils there may be a spacer on the top or the bottom. Are they factory shocks?? (all black, all metal)
Looks like a stock height F-250 to me.
At the most a leveling kit. If you look at the front coils there may be a spacer on the top or the bottom. Are they factory shocks?? (all black, all metal)
Trending Topics
Thread Starter
|
Elder User
Joined: Aug 2007
Posts: 571
Likes: 1
OK, Here is the pic.
Measured the distance from the top of the bed rail down. 57" or 4' 9".
The funny thing is, I driven past Dodges that have an obviouse lift, and I am sitting just as high. lol
Measured the distance from the top of the bed rail down. 57" or 4' 9".
The funny thing is, I driven past Dodges that have an obviouse lift, and I am sitting just as high. lol
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
New User
Joined: Dec 2006
Posts: 20
Likes: 0
Thats a good looking truck, and for future reference when you guys try to measure lift it would make more sense to measure from the center of the hub to the bottom of the fender, its a helluva lot more accurate because not every 35" tire is the same size. Atleast thats how I do it on my Jeeps.
