o2 Sensor (Bank 1, Sensor 2)
#32
Originally Posted by krewat
First, I'd figure out what pin that O2 sensor is on at the PCM and make sure there's continuity between that pin on the connector, and the O2 sensor connector.
That means removing the PCM connector and checking from there.
I just checked my EVTM for 2001 and it doesn't even show the third O2 sensor... darn it.
That means removing the PCM connector and checking from there.
I just checked my EVTM for 2001 and it doesn't even show the third O2 sensor... darn it.
The SES light shut off on it's own. Is their a short, trucks now has all power restored.
Thread
Thread Starter
Forum
Replies
Last Post
krewat
Modular V8 (4.6L, 5.4L)
13
11-07-2009 07:03 PM