a/c
#17
ac/heater problem
Thanks Steve for the posting. I have removed the **** and found it to have a couple cracks so I have ordered the part at the local ford dealer. I was kind of amazed that they did not have one in stock... but the guy was pretty friendly and said that they sell a couple of those each month for about $10 so I am crossing my fingers that it will fix the problem.
While the **** is off I turned the heat to warm so at least I can defrost my winshield in the morning.
Just in case what would you suggest next if hte know does nothing? Should I get down on the floor and see if when I turn the **** the actuator mortor moves anything down by the transmission hump? I am a computer guy and not much of a mechanic but would be willing to tackle this b4 shelling out big dollars.
Thanks again
Mark
While the **** is off I turned the heat to warm so at least I can defrost my winshield in the morning.
Just in case what would you suggest next if hte know does nothing? Should I get down on the floor and see if when I turn the **** the actuator mortor moves anything down by the transmission hump? I am a computer guy and not much of a mechanic but would be willing to tackle this b4 shelling out big dollars.
Thanks again
Mark
#18
Instructions for dash removal
you can use this link to find the instuctions.
http://my.voyager.net/~sscully/F-15097HtrCoreRepairF150_Exp_002.doc
I hope that is what you are looking for. If you have problems downloading you can post an email and I will send it to you.
Mark
http://my.voyager.net/~sscully/F-15097HtrCoreRepairF150_Exp_002.doc
I hope that is what you are looking for. If you have problems downloading you can post an email and I will send it to you.
Mark
#19
#22
Thread
Thread Starter
Forum
Replies
Last Post
NativeDescent
1987 - 1996 F150 & Larger F-Series Trucks
3
04-26-2015 08:28 AM
scottddove
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
09-15-2007 12:00 AM