Rear Wheel Seal
Thread Starter
|
New User
Joined: Mar 2006
Posts: 22
Likes: 0
From: Tucker GA.
Rear Wheel Seal
This is on an 01 PSD 2WD DRW Does anyone know the Torque Specs on the Spindle Nut and also the size of the socket for the spindle nut. Do I need a
special tool for remove and replace the axle seal.
Thanks for any help!
special tool for remove and replace the axle seal.
Thanks for any help!
Elder User
Joined: Sep 2006
Posts: 899
Likes: 0
From: Irmo, SC
When I did mine I had to get this special socket. Sort of like an old 4wd front socket. Autozone and Advance did not have it so I had to go to a local place they had one it was like $25. I think when I thightened it it was snug and then back off 1/4 turn or something. I will see if I could find the post where I did it.
Elder User
Joined: Sep 2006
Posts: 899
Likes: 0
From: Irmo, SC
Here is the link to the thread when I did mine. https://www.ford-trucks.com/forums/5...rear-axle.html Hope this answers your questions.
