C 6 rebuild
Senior User
Joined: May 2007
Posts: 150
Likes: 0
Just finished mine and it runs great. Its a pretty typical 3 speed auto. Be sure to check out all your bushings, as well as the gear teeth and that the planets aren't loose on the pinion shafts that they ride on (I had to buy a new foreward planetary carrier and rind gear). Also, be careful with the snap rings for the foreward clutch- they look the same but are different thicknesses. If you revers the one that retains the return spring and the one that retaings the top pressure plate, there will be too much clearance in your clutch pack. One more thing, definately worth it to go through the valve body- the filter on a c6 is a joke, and mine was full of metal shavings and clutch material.
Hope this helps
Hope this helps
Senior User
Joined: Nov 2005
Posts: 319
Likes: 2
Thread
Thread Starter
Forum
Replies
Last Post
Frarei1324
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
1
Sep 30, 2016 01:39 PM
Evans88
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
6
Dec 15, 2014 08:05 PM
kgkleader
1973 - 1979 F-100 & Larger F-Series Trucks
3
Aug 12, 2009 03:48 PM
shredder1223
1968-Present E-Series Van/Cutaway/Chassis
3
Apr 25, 2008 06:15 PM
