Oil Pressure guage
Thread Starter
|
Tuned
Joined: Jul 2007
Posts: 291
Likes: 0
From: Cookeville, TN
Oil Pressure guage
Originally Posted by bkcowboss
The oil pressure sensor is mounted on the hpop so if it is working properly and registering pressure then their is oil being supplied to the HPOP. (I believe that switch is an on/off switch. It is not going to tell you how much pressure, just that it is there.)
Post Fiend
Joined: Mar 2007
Posts: 9,010
Likes: 5
From: Johnson City, TN.
I tried that yesterday and it is an o-ring fitting. Check out this post I posted today maybe it helps.
https://www.ford-trucks.com/forums/6...ml#post5026029
https://www.ford-trucks.com/forums/6...ml#post5026029
Thread Starter
|
Tuned
Joined: Jul 2007
Posts: 291
Likes: 0
From: Cookeville, TN
Originally Posted by Neal 97 250
I tried that yesterday and it is an o-ring fitting.
I think I can get the part I need to do this...besides it looks like my dummy guage sensor is cracked...
Post Fiend
Joined: Mar 2007
Posts: 9,010
Likes: 5
From: Johnson City, TN.
Good luck with the connections. I tried all over 2 cities and nothing. The problem was getting the female side of that connection. It is usually machined into something solid and not made into a connection fitting. Also the plastic cover on your sending unit is nothing mahor. If it is cracked tape it up and keep on truckin'.
