branutoyu
Thread Starter
|
New User
Joined: Oct 2006
Posts: 3
Likes: 0
branutoyu
Hey All,
I am an ardent ford truck person, that is untill of late. I bought a really nice(I thought ) 1993 f350 dumper. the head blew a hole in the head side of the exhaust flange and now the engine is sitting on the floor of my shop so that I can replace the two heads. Problem is the heads are so rusted I cannot read the casting #'s can anyone tell me another way to identify the heads Thank you all in advance.
1993 Ford superduty
7.5 ltr/ air( injection, but you knew that)
I am an ardent ford truck person, that is untill of late. I bought a really nice(I thought ) 1993 f350 dumper. the head blew a hole in the head side of the exhaust flange and now the engine is sitting on the floor of my shop so that I can replace the two heads. Problem is the heads are so rusted I cannot read the casting #'s can anyone tell me another way to identify the heads Thank you all in advance.
1993 Ford superduty
7.5 ltr/ air( injection, but you knew that)
Moderator
Joined: Dec 2003
Posts: 97,519
Likes: 1,998
From: Saskatoon, Saskatchewan
Welcome Doug, nice to have you on board.
Sorry about your problems, hopefully you`ll be back on the road again real soon.
Drop into the Pre-Power Stroke Diesel (7.3L IDI & 6.9L) forum:https://www.ford-trucks.com/forums/forum117/ to get some answers.
Visit your local New England Region chapters which covers Ma.
]
Sorry about your problems, hopefully you`ll be back on the road again real soon.
Drop into the Pre-Power Stroke Diesel (7.3L IDI & 6.9L) forum:https://www.ford-trucks.com/forums/forum117/ to get some answers.
Visit your local New England Region chapters which covers Ma.
]
Thread
Thread Starter
Forum
Replies
Last Post
