burn out
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 226
Likes: 0
burn out
is there any way you can rig up front brakes only so you can do a bad *** burnout and not toast ur rear brakes? Does your e brake lock up all four or just rear two and if all 4 can you just cut the cable to the rear...im pretty sure its just the rear anyways but im not positive?
Lead Driver
Joined: May 2007
Posts: 8,606
Likes: 13
From: Belair md
definatly the rear only for the park brake, the only real way to do what you are asking is to install a line lock found on most race cars but for a truck purpose its impractical
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
Post Fiend
Joined: Oct 2003
Posts: 5,903
Likes: 1
From: MICHIGAN
You could add an adjustable proportioning valve into the rear brakes. Install it in the cab. I use one on my Cuda for burnouts.
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
Post Fiend
Joined: Mar 2007
Posts: 9,010
Likes: 5
From: Johnson City, TN.
You can also manually adjust the rear brakes way in where they won't work as good. They will eventually readjust themselves though. Or just pull it up to a strong wall and hope your bumper holds out.
Thread
Thread Starter
Forum
Replies
Last Post
madcarpenter
1983 - 2012 Ranger & B-Series
7
Feb 28, 2012 05:51 PM
HazeyDavey302
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
4
Mar 24, 2006 11:14 AM
blatherskite
1961 - 1966 F-100 & Larger F-Series Trucks
12
Mar 23, 2005 05:54 AM
