Engine ID
Thread Starter
|
Junior User
Joined: Feb 2000
Posts: 66
Likes: 0
From: Michigan
Engine ID
I recently bought a 351W that is labeled as a
Pleasurecraft Marine Engine Co. 5.8L GT 40. How are Gt 40 heads identified? I haven't removed the valve covers yet but I can see a GT cast into the side near the end and a 66 or a 99 cast into the top near the end, there is also three verticle ridges cast into the end. The EFI manifold has PFF2JE9K461BA cast into the top near the distributer hole. Can anyone verify that these parts are GT40 parts?
I appreciate any help on these questions. Ed B
Pleasurecraft Marine Engine Co. 5.8L GT 40. How are Gt 40 heads identified? I haven't removed the valve covers yet but I can see a GT cast into the side near the end and a 66 or a 99 cast into the top near the end, there is also three verticle ridges cast into the end. The EFI manifold has PFF2JE9K461BA cast into the top near the distributer hole. Can anyone verify that these parts are GT40 parts?
I appreciate any help on these questions. Ed B
