BW 1356 O/P Yoke needed
#1
BW 1356 O/P Yoke needed
Hey could anyone point me in the right direction, I require a Borg Warner 1356 Transfer case (86 Bronco) O/P Yoke, actually even a front O/P Yoke is fine, it just needs to suit a Borg Warner Transfer case. The New Process Transfer case splines are different.
I have had no success over here in finding one as no-one wants to seperate a transfer case.
So I figure one of you would be able to assist in recomending wrecking yard or you may even have one at home.
I believe the part number is E7TZ-7B214C
It is the "Nut" style Yoke, that slides over the o/p spline and then is held on with a nut.
I am running out of options
Thanks in advance,
Daryl.
I have had no success over here in finding one as no-one wants to seperate a transfer case.
So I figure one of you would be able to assist in recomending wrecking yard or you may even have one at home.
I believe the part number is E7TZ-7B214C
It is the "Nut" style Yoke, that slides over the o/p spline and then is held on with a nut.
I am running out of options
Thanks in advance,
Daryl.
#4
I have a complete B/W 1356 for sale in the classified forum. Yes it has both output shafts. Hell, ya now what, you pay shipping, I'll send ya the whole damn thing! Let me know. I am going on a 3-day vacation, so I will not be able to respond immediatly. It works perfectly, I swapped in an NP-205, that is the only reason I took it out.